Selecting Initial Screen Display

Continuing with our Baby Lock Customization, you can set your machine to one of three options when it starts up. Now, the factory setting and default option for your machine is the Opening Screen, which runs a short movie clip until you touch the screen, setting it to the home page. To change this, hit your settings button, and make sure you’re in Setting Screen 5.

Press the arrows to cycle through

Press the arrows to cycle through

Press the arrows left or right to cycle through your options. The other two choices are the Home Page, so that rather than running through the opening movie, when you boot up, your machine will automatically go to this screen:

Home screen…all the options without the movie song and dance.

Home screen…all the options without the movie song and dance.

Your other option is to have the machine boot up automatically in either sewing or embroidery mode. In this mode, if your embroidery unit is attached to the machine, it will automatically load to the embroidery screen:

Embroidery unit must be attached to load this screen automatically.

Embroidery unit must be attached to load this screen automatically.

If the embroidery unit is NOT attached and your initial screen display is set to Sewing/Embroidery Screen, then your sewing screen will show on boot up.

Sewing Mode

Sewing Mode

And those are your options. I left mine set for sewing/embroidery screen mode, but that’s my preference. Customize your machine how you want it to run.