Setting the Bobbin

Setting the bobbin is as easy as follow the arrows. Like everything else with The Machine, pictures are involved. To start, remove the bobbin cover by hitting the release button.

Release the Kraken!

Release the Kraken!

Sliding the button to the right releases the bobbin cover plate. Your bobbin should be held with the thread to the left and the bobbin would unwind clockwise.

Thread to the left

Thread to the left

Set the bobbin in place and follow the arrows.

Follow the arrows

Follow the arrows

Pulling the thread up at the end of arrow 3 will cut the thread. Then you just need to set the cover back in place and you’re done setting the bobbin.

Ready to sew

Ready to sew

Easy steps to set the bobbin and you are ready to rock and roll.